Instant GluesAron Alpha®Accessories
We offer a wide range of accessories to further enhance the usability of Aron Alpha®.
Our lineup of accessories, including primer for hard-to-adhere surfaces and curing accelerator for reducing adhesion time are available to enhance the usable of Aron Alpha®.
Specifications
Aron Alpha® Primer
Bond hard-to-adhere materials and increase the usability of Aron Alpha®.
- Choose the right primer for the type of adherend suited to your application.
| Grade | Adherend |
|---|---|
| PP Primer® | PP, PE, olefin elastomer, etc. |
| AA • Glass primer | Glass |
| AA • Silicone rubber primer | Silicone rubber |
PP Primer®
| Adherend | Adhesion time (seconds) | Tensile shear strength (N/mm2) | ||
| No primer | With primer | No primer | With primer | |
| PP | 300 and above | 3 | 0.3 | 5.0 (material destruction) |
| PE | 300 and above | 3 | 0.3 | 3.0 |
| EPT rubber | 7 | 2 | 0.5 | 2.0 (material destruction) |
*Bonding primer-treated material with Aron Alpha®201.
Directions
Pre-soak primer with absorbent cotton or felt, and wipe the adhesion surface one or two times. Bond using Aron Alpha® once the primer has dried. If the primed surface is left without adhesion for a long time, the performance may not be evident due to factors such as temperature and humidity. Be sure to bond the primed adherend as soon as possible.
Aron Alpha® Curing Accelerator
A curing accelerator for Aron Alpha® that reduces adhesion time.
| Grade | AA Setter | AA Setter DM3 | AA Accelerator | AA Accelerator 2 |
| Solvent | Alcohol | Acetone | Acetone | Alcohol |
|---|---|---|---|---|
| Containers | Can | Can | Spray can | Spray can |
- Ideal for the following applications
- Prevent whitening on the periphery of the adhesive.
- Fill crevices or heaped adhesion.
- Rapidly cure Aron Alpha®
Directions
These peripheral products make it possible to bond materials that would otherwise be difficult to bond with Aron Alpha® alone.